Adjustable Vee Block
20129

All workholding devices are designed to work with the Stevens Grid Pattern on subplates, tombstones and accessories
  • Mounts on any standard Stevens pattern with pull dowels and cap screws.
  • Right and left hand lead screws mount-ed on a common shaft move the two half vees either together or apart as the shaft is rotated.
  • Vertical centerline position of the work-piece remains constant, while the horizontal centerline is raised or lowered.
  • Diameter capacity: 10.5"
  • Material: Contact surfaces are alloy steel, case hardened to 60Rc.
PART NO.  
20129  
DRAWING DETAILS

  • Vee Block Extenders may be used where access to the O. D. is limited by cast bosses or ribs.

APPLICATION
  • The Adjustable Vee Block may be used in combination with P/N 20065 Vee Block.

  • Shown here is a procedure for leveling a workpiece with different outside diameters on each end.

Part Number
Description
CAD
download
Cost
USD
20129
ADJUSTABLE VEE BLOCK
Parasolid
20129.zip
$2915
10151-1
Vee Extender - pair 0.5000in.
File Request
10151-1
$38.2
10151-2
Vee Extender - pair 0.6250in.
File Request
10151-2
$41.3
10151-3
Vee Extender - pair 0.7500in.
File Request
10151-3
$45.35
10151-4
Vee Extender - pair 0.8750in.
File Request
10151-4
$48.45
10151-5
Vee Extender - pair 1.0000in.
File Request
10151-5
$51.55
10151-6
Vee Extender - pair 1.1250in.
File Request
10151-6
$54.65
10151-7
Vee Extender - pair 1.2500in.
File Request
10151-7
$57.75
10151-8
Vee Extender - pair 1.3750in.
File Request
10151-8
$60.85